Better Fmc Style Rressure Relief Valve Weco 3” Figure 1502 Connections China

• Customization: Available
• Type: Electronically Controlled
• Material: Carbon Steel
• Model NO.: BETTER FMC style RRESSURE RELIEF VALVE
• Certification: ISO9001
• Standard: ANSI
• Pressure: High Temperature
• API: 6A
• Transport Package: Carton, Plywood Case
• Specification: 3′′
• Trademark: BETTER
• Origin: China
• HS Code: 84814000
• Production Capacity: 5000 PCS Per Year

Product Description

Electronically controlled pressure relief valve (EPRV)


The BETTER FMC style electronically controlled pressure relief valve (EPRV) automatically reseats after
an over pressure event, improves reliability and accuracy while reducing personnel exposure
at the well site. Unlike other full opening pressure relief valves, the EPRV is electrically powered
and requires no gas bottles or hoses, reducing the exposure of your people and protecting your
Equipment.

Solution engineered

The BETTER FMC style Electronically Controlled Pressure Relief Valve (EPRV) is solution engineered with simplicity, reduced exposure and reliability in mind.
With the ability to re-seat itself without manual intervention, your personnel stay out of the red zone, resulting in less personnel exposure, less downtime and improved production. Unlike other full-opening pressure relief valves, the EPRV is electrically powered and requires no gas bottles or hoses, improving the protection of your people and equipment.

The EPRV will accurately and rapidly relieve the full line pressure allowing you to trouble shoot the root cause of the incident. It also comes standard with Weco end connections, which are known
for their proven reliability. With hydraulic fracturing operations becoming more sophisticated and capital intensive, the pressure pumping liability risks have never been higher. Equipment uptime and reducing personnel exposure have become greater priorities across all basins.
The ePRV will improve your bottom line performance and help protect your people and equipment.

Key features

1.Requires no gas bottles or hoses
2.Does not require a separate gas control panel
3. Not subject to change pressure due to gas law effect when ambient temperatures change
4. Operated by hydraulic piloting system as opposed to gas system
5.Standard piloting systems requires only 24 VDC, 2 amp signal to operate (consult factory for other available voltages)
6.Main valve uses proven Weco standard tee body forging
7. If power is lost, the EPRV failure mode is to pop open unless battery back-up is employed
8. Reseats automatically after line pressure is fully relieved (operations terminating relief device)
9.Easy field-replaceable main valve internal components
10.Visual indicator allows you to see when the valve is open/closed
11.Patents Pending

Specifications

Configuration

1.Standard Weco Union Ended Connections
- a. Inlet: 3" Figure 1502 male sub and nut
- b. Outlet: 3" Figure 1502 female sub
2. Cold working pressure of 15,000 psi
3. Main valve bore: 1.75"
4. Main valve and pilot valve body made from high strength low alloy steel
5. Piloting system internal components employ precipitation hardened stainless steel materials
6.Explosive decompression resistant intervals
7. Liquid nitride hardened main valve poppet Installation
8.Standard Weco 3" Figure 1502 connections
9. For use on main flowlines between missile trailer and well
10. Consult the factory for EPRV systems employing the following:
- a. Isolation Valves
- b. Lifting Cages

Design Rating

1. Weight: 157 lbs (71 kg)
2. Max. Working Pressure:15,000 psi (103.4 MPa)
3. Operating Temperature:-40 to 180 °F (-40 to 82 °C)
4. Envelope Dimensions:
- Height: 24.7" (628 mm)
- Width: (Outlet Side): (Outlet Side): 12.9" (328 mm)
- Depth: (Nut Clearance): (Nut Clearance): 11.3" (288 mm)
5. Part Number:
- EPRV Assembly: P557316
- Repair Kit: P557277

Interfaces
1.Pilot valve electrical connector:
- Height: 24.7" (628 mm)
- Width: (Outlet Side): (Outlet Side): 12.9" (328
mm)
- Depth: (Nut Clearance): (Nut Clearance): 11.3"
(288 mm)
2. Part Number:
- DIN 43650 Form "A"
- (ISO 4400, EN175301-803:2000)

Detailed Photos



Certifications



Other Product View


Company Profile

BETTER Drilling Fluid Equipment Industrial Limited was established in 2008 year, and engaged in producing pump products at earlier. The company located in Dezhou, Shandong Province. BETTER not only exports the drilling fluid control equipment and mud system solid control equipment, but also supply handling tools, tong dies inserts, and other oilfield equipment. We would like to provide one-stop purchasing service when our client has a related requirement on handling tools. Now our handling tools products has a great leap forward development. Drill pipe power tong designed and manufactured by the company is a necessary and symbolic tool for mechanized wellhead operation, a batch of automation wellhead tools represented by Iron roughneck developed in recent years creates the new era for drilling machines on the wellhead.

We can supply wellhead product as such drilling pipe power tong, casing power tong, hydraulic power tong, air winch, hydraulic cathead, rotary cathead, casing guide, deadline anchor, Kelly bushing, master bushing, Kelly or swivel spinner, casing tubing coupling bucking unit, Elevator, slip, clamp, manual tong, tong dies and slip inserts and so on.

BETTTER products Handling Tools are manufactured and inspected strictly according to API 7K,8C and ISO Licenses.

BETTER is no way affiliated with any O.E.M. Name and Part Number are for identification purpose only and are not for trademarks or trade names used by BETTER.

Factory