Superior Quality Pump Spare Parts
used for XBSY, VICTORY, WESTPETRO, 2500SB Sand Pump
1. Overview
2500SB series sand pumps are supplementary pumps, newly designed and manufactured according to features of petroleum and natural gas drilling equipment. Such pumps, adopting axial suction structures and using wear-resistant cast iron for flow-passing parts, applicable to deliver corrosive drilling fluid (with suspended particulates) or other liquid media under similar work condition, are the best optional pumps of sand removers, mud recovers and mixing hoppers as well as perfect perfusion pumps of mud pumps. For design of their parameters, that equipment with which such pumps are used together can operate under the best work condition has been fully considered. These pumps are mainly characterized by good versatility and exchangeability of parts, less leakage of shaft seal, reliable operation, long service life and convenient maintenance.
Sand pumps 2500SB8×6 and SB6×5 are respectively recommended to be used with drillers over 3200m and below 2500 m.
2500SB series sand pumps have 22 specifications at present, which may also be derived more specifications as per the different requirements of the customer to the performance, power and motor. Sealing of 2500SB series sand pumps are of one types: mechanical seal . Main seal is mechanical seal with high wearing hard alloy that is with a long life; auxiliary seal of mechanical seal is carbon fibre packing seal that can avoid accidents. The practice has demonstrated that 2500SB series sand pump seal is reliable and convenient for maintenance.
Bearings of 2500SB series are lubricated with oil. In addition, bearings can also be lubricated with grease (bearing caps at two ends of bearings are equipped with grease nipples).
Both inlet flanges and outlet flanges of 2500SB series sand pumps are with standard dimensions, in English system for foreign users and in metric system for domestic users.
Our 2500SB series sand pumps have been used for land and offshore drilling platforms in more than 20 countries over the world, and the result shows that these pumps requires little maintenance expenses other than the normal replacement of sealing components.
2. Performance table (clean water performance. If the user makes special requirements for performance, design may be made according to requirements)
(Table 1: in English system)
| Type |
Flow (GPM) |
Head (FEET) |
Speed
(RPM) |
Eff .
(%) |
NPSH
(FEET) |
Shaft Power
(HP) |
Motor Power
(HP) |
| 2500SB10×8-14 |
2000 |
95 |
1750 |
60 |
16 |
83 |
150 |
| 2500SB10×8-13 |
1550 |
88 |
1750 |
60 |
16 |
59 |
125 |
| 2500SB10×8-12 |
1320 |
82 |
1750 |
60 |
16 |
46 |
100 |
| 2500SB8×6-14 |
1320 |
131 |
1750 |
67 |
15 |
65 |
125 |
| 2500SB8×6-13 |
1050 |
121 |
1750 |
67 |
15 |
49 |
100 |
| 2500SB8×6-12 |
880 |
118 |
1750 |
66 |
15 |
42 |
75 |
| 2500SB8×6-11 |
880 |
108 |
1750 |
64 |
15 |
38 |
60 |
| 2500SB6×5-14 |
880 |
114 |
1750 |
64 |
15 |
40 |
75 |
| 2500SB6×5-13 |
880 |
108 |
1750 |
64 |
15 |
38 |
60 |
| 2500SB6×5-12 |
780 |
102 |
1750 |
61 |
13 |
34 |
50 |
| 2500SB6×5-11 |
700 |
92 |
1750 |
61 |
13 |
25 |
40 |
| 2500SB6×5-10 |
615 |
79 |
1750 |
61 |
13 |
22 |
30 |
| 2500SB5×4-14 |
395 |
130 |
1750 |
61 |
11 |
26 |
50 |
| 2500SB5×4-12 |
340 |
100 |
1750 |
60 |
11 |
16 |
30 |
| 2500SB4×3-12 |
375 |
100 |
1750 |
60 |
10 |
19 |
40 |
| 2500SB4×3-11 |
350 |
82 |
1750 |
58 |
10 |
12 |
25 |
| 2500SB4×3-10 |
350 |
75 |
1750 |
57 |
10 |
11 |
15 |
| 2500SB4×3-9 |
310 |
58 |
1750 |
57 |
10 |
7 |
10 |
| 2500SB3×2-13 |
350 |
110 |
1750 |
56 |
10 |
15 |
30 |
| 2500SB3×2-11 |
220 |
90 |
1750 |
56 |
10 |
9 |
15 |
| 2500SB3×2-10 |
200 |
70 |
1750 |
54 |
10 |
7.5 |
10 |
| 2500SB3×2-9 |
175 |
50 |
1750 |
54 |
10 |
4.4 |
7.5 |
Bill of parts (2500SB Sand pump Explosive Drawing)
| Item |
Description |
Qty. |
|
Item |
Description |
Qty. |
|
Item |
Description |
Qty. |
| 1 |
Case |
1 |
|
2 |
Impeller |
1 |
|
3 |
Wear pad |
1 |
| 4 |
Paper gasket |
1 |
|
5 |
Stud |
12 |
|
6 |
Nut |
12 |
| 7 |
Spring gasket |
12 |
|
8 |
Paper gasket |
1 |
|
9 |
Screw bolt |
8 |
| 10 |
Nut |
8 |
|
11 |
Spring gasket |
8 |
|
12 |
Stuffing box |
1 |
| 13 |
Cover, inboard |
1 |
|
14 |
Paper gasket |
1 |
|
15 |
Oil seal |
1 |
| 16 |
Oil seal |
1 |
|
17 |
Bearing, inboard |
1 |
|
18 |
Oil cover |
1 |
| 19 |
Base frame |
1 |
|
20 |
Bearing house |
1 |
|
21 |
O-ring |
1 |
| 22 |
Bearing, outboard |
2 |
|
23 |
O-ring |
1 |
|
24 |
Grease fitting |
2 |
| 25 |
Locknut |
1 |
|
26 |
Lockwasher |
1 |
|
27 |
Cover, outboard |
1 |
| 28 |
Oil seal, outboard |
1 |
|
29 |
Shaft |
1 |
|
30 |
Bolt |
8 |
| 31 |
Nut |
4 |
|
32 |
Spring gasket |
8 |
|
33 |
Bolt |
4 |
| 34 |
Spring gasket |
4 |
|
35 |
Oil gauge |
1 |
|
36 |
Plug |
5 |
| 37 |
Mud throwing ring |
1 |
|
38 |
Plug |
2 |
|
39 |
Gland bolts |
2 |
| 40 |
Nut |
2 |
|
41 |
Washer |
2 |
|
42 |
Bolt |
2 |
| 43 |
Washer |
2 |
|
44 |
Packing gland set |
1 |
|
45 |
O-ring |
1 |
| 46 |
Packing |
2 |
|
47 |
Pin |
1 |
|
48 |
Sleeve, shaft |
1 |
| 49 |
Mechanical seal |
1 |
|
50 |
Cover |
1 |
|
51 |
Bolt |
4 |
| 52 |
Spring gasket |
4 |
|
53 |
Thin key |
1 |
|
54 |
Key |
1 |
| 55 |
Domed cap nut |
1 |
|
56 |
Nut |
1 |
|
57 |
Washer |
1 |
Bill of parts (2500SB Sand pump Set Explosive Drawing)
| Item |
Description |
Qty. |
|
Item |
Description |
Qty. |
|
Item |
Description |
Qty. |
| 1 |
Electromotor |
1 |
|
2 |
Nut |
4 |
|
3 |
Spring gasket |
4 |
| 4 |
Pins and sheath loops |
10 |
|
5 |
Electromotor joint |
1 |
|
6 |
Pump joint |
1 |
| 7 |
Shield cover |
1 |
|
8 |
Key |
1 |
|
9 |
Bolt |
4 |
| 10 |
Washer |
4 |
|
11 |
Bolt |
4 |
|
12 |
Washer |
4 |
| 13 |
Pump head |
1 |
|
14 |
Foundation |
1 |
|
15 |
Nut |
4 |
| 16 |
Spring gasket |
4 |
|
17 |
Earth-peg |
4 |
|
18 |
Spring gasket |
4 |
| 19 |
Bolt |
4 |
|
20 |
Washer |
4 |
|
21 |
Earth show card |
1 |
Attached C 2500SB Sand Pump Spare Part List
2500SB10×8 Spare Part List
| Item |
Name |
Model & specifications |
Unit |
Qty. |
| 1 |
Oil seal |
63.5×88.8×12 |
EA |
2 |
| 2 |
Oil seal |
47.6×69.9×10 |
EA |
1 |
| 3 |
Packing ring |
|
Kg |
0.5 |
| 4 |
Suction & discharge rubber |
Φ250,Φ200 |
EA |
Apiece 1 |
| 5 |
Oil nipple |
|
EA |
2 |
| 6 |
Oil gauge |
|
EA |
1 |
| 7 |
Connection & rubber drums |
|
EA |
10 |
2500SB8×6 Spare Part List
| Item |
Name |
Model & specifications |
Unit |
Qty. |
| 1 |
Oil seal |
63.5×88.8×12 |
EA |
2 |
| 2 |
Oil seal |
47.6×69.9×10 |
EA |
1 |
| 3 |
Packing ring |
|
Kg |
0.5 |
| 4 |
Suction & discharge rubber |
Φ200,Φ150 |
EA |
Apiece 1 |
| 5 |
Oil nipple |
|
EA |
2 |
| 6 |
Oil gauge |
|
EA |
1 |
| 7 |
Connection & rubber drums |
|
EA |
10 |
2500SB6×5 Spare Part List
| Item |
Name |
Model & specifications |
Unit |
Qty. |
| 1 |
Oil seal |
63.5×88.8×12 |
EA |
2 |
| 2 |
Oil seal |
47.6×69.9×10 |
EA |
1 |
| 3 |
Packing ring |
|
Kg |
0.5 |
| 4 |
Suction & discharge rubber |
Φ150,Φ125 |
EA |
Apiece 1 |
| 5 |
Oil nipple |
|
EA |
2 |
| 6 |
Oil gauge |
|
EA |
1 |
| 7 |
Connection & rubber drums |
|
EA |
10 |
2500SB5×4 Spare Part List
| Item |
Name |
Model & specifications |
Unit |
Qty. |
| 1 |
Oil seal |
63.5×88.8×12 |
EA |
2 |
| 2 |
Oil seal |
47.6×69.9×10 |
EA |
1 |
| 3 |
Packing ring |
|
Kg |
0.5 |
| 4 |
Suction & discharge rubber |
Φ125,Φ100 |
EA |
Apiece 1 |
| 5 |
Oil nipple |
|
EA |
2 |
| 6 |
Oil gauge |
|
EA |
1 |
| 7 |
Connection & rubber drums |
|
EA |
10 |
2500SB4×3 Spare Part List
| Item |
Name |
Model & specifications |
Unit |
Qty. |
| 1 |
Oil seal |
63.5×88.8×12 |
EA |
2 |
| 2 |
Oil seal |
47.6×69.9×10 |
EA |
1 |
| 3 |
Packing ring |
|
Kg |
0.5 |
| 4 |
Suction & discharge rubber |
Φ100,Φ80 |
EA |
Apiece 1 |
| 5 |
Oil nipple |
|
EA |
2 |
| 6 |
Oil gauge |
|
EA |
1 |
| 7 |
Connection & rubber drums |
|
EA |
10 |
2500SB3×2 Spare Part List
| Item |
Name |
Model & specifications |
Unit |
Qty. |
| 1 |
Oil seal |
63.5×88.8×12 |
EA |
2 |
| 2 |
Oil seal |
47.6×69.9×10 |
EA |
1 |
| 3 |
Packing ring |
|
Kg |
0.5 |
| 4 |
Suction & discharge rubber |
Φ80,Φ50 |
EA |
Apiece 1 |
| 5 |
Oil nipple |
|
EA |
2 |
| 6 |
Oil gauge |
|
EA |
1 |
| 7 |
Connection & rubber drums |
|
EA |
10 |
){kind=link}